, Automotive LIDAR semiconductor revenue growing from $103m in 2016 to $1.8bn in 2026

Temescal

Semigas

CLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIACLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIA

Join our LinkedIn group!

Follow ST on Twitter

IQE

22 September 2017

Automotive LIDAR semiconductor revenue growing from $103m in 2016 to $1.8bn in 2026

The automotive LIDAR (light detection and ranging) system market is growing from $230m in 2016 to $2.5bn in 2026, with LIDAR semiconductor revenue rising from $103m to $1.8bn, according to a report by IHS Markit.

The current generation of automated functions — automatic emergency braking, adaptive cruise control, and lane keep assistance — rely largely on cameras, radars and ultrasonic sensors. Each of these devices is limited to different conditions, e.g. weather, object detection, distance, etc. As the complexity of automated driving functions proliferate through L3 to L5, OEMs need to produce more reliable and fail-operational platforms.

Currently, LIDAR is a primary choice for redundant sensing in supporting cameras and radars with object recognition, distance estimations and dynamic mapping. In addition, it offers 3D map localization and high-resolution cloud-point images serving as a key to the development of automated driving technology.

The technology muddle

With regard to LIDAR, OEMs are currently technology agnostic and aim to roll out automated car platforms around 2020. However, existing commercialized LIDAR technologies do not meet the performance requirements of automated driving, says the IHS Markit report. Range, low-reflectivity targets, high resolution and eye-safety are some of the key requirements. In addition, mechanical scanning LIDARs are vulnerable to shocks, vibration and degradation. Furthermore, its large form factor and high cost restricts its entry into production volumes.

“Clearly a better technology is needed,” says Akhilesh Kona, senior analyst for automotive electronics and semiconductors. “A battle is now ensuing with solid-state LIDAR technology based on either MEMS or electro-optics or optical phased arrays and high-resolution flash devices, all aiming to address the performance requirements of automated driving. Of the promising technologies under development today, each has its advantages and limitations regarding manufacturing, cost, automotive qualification, and other factors.”

So far, most of the emerging LIDAR suppliers differentiate via in-house design capabilities, starting at the semiconductor level, and it is unclear which combination of LIDAR emitter, detector and beam-steering technology will lead 10 years from now. IHS Markit has evaluated the LIDAR market and supply chain by four emitter technologies, five detector types, and up to 10 beam-steering mechanisms.

Supplier landscape

Continental, Valeo and Denso are currently the sole suppliers of flash LIDAR solutions, while Velodyne, Valeo and Ibeo are the major suppliers of mechanical scanning LIDARs. The LIDAR market will become increasingly crowded after 2020, when more than 15 suppliers will enter the fray with different solutions, forecasts IHS Markit.

LIDAR technology is driven mostly by non-automotive optical companies and many start-ups. Business models see partnerships among the traditional tier-1s and LIDAR suppliers starting to coalesce. Examples of this include Magna and Innoviz Technologies and Infineon’s acquisition of Innoluce. Strategic investments include Denso with Trilumina, ZF with Ibeo, Delphi with Quanergy, Delphi and Magna with Innoviz Technologies, and many more, notes the IHS Markit report.

Tags: LiDAR

Visit: https://technology.ihs.com/595094/automotive-lidar-technology-market-report-2017

Share/Save/Bookmark
See Latest IssueRSS Feed

AXT