, Plextek RFI and Filtronic Broadband develop 26GHz SMT front-end multi-chip module addressing lack of components for European 5G ‘Pioneer Band’

Temescal

Semigas

CLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIACLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIA

Join our LinkedIn group!

Follow ST on Twitter

IQE

3 October 2017

Plextek RFI and Filtronic Broadband develop 26GHz SMT front-end multi-chip module addressing lack of components for European 5G ‘Pioneer Band’

Plextek RFI Ltd of Cambridge, UK (which designs RFICs, MMICs and microwave/millimeter-wave modules) has developed a multi-chip module (MCM) to cover the recently designated European ‘Pioneer Band’ for mmWave 5G around 26GHz. The development of the front-end module (FEM) was carried out in collaboration with Filtronic Broadband, which designs and manufactures RF, microwave and mm-wave products for telecoms and aerospace/defence OEMs.

“The band 24.25-27.5GHz was designated at the end of last year by the EU Radio Spectrum Policy Group (RSPG) as the preferred band, or ‘Pioneer Band’, for mmWave 5G,” says Plextek RFI’s CEO Liam Devlin. “We welcome the opening up of this spectrum band for 5G, but we identified early on that there was a lack of components available at this frequency, and that led us to define this joint FEM development project.”

The FEM comprises a gallium arsenide (GaAs) low-noise amplifier (LNA), power amplifier (PA) and transmit/receive switch housed in a custom laminate surface-mount (SMT) package measuring 10mm x 10mm. The receive-path gain is 20dB across the full band, with a noise figure of 3.5dB. The transmit-path gain is 19dB, and the output referred third-order intermodulation (IP3) is +36dBm. Low-loss RF filtering has been integrated into the package structure, with a band-pass filter after the LNA and a harmonic rejection filter after the PA. Insertion-loss figures are 0.7dB for the band-pass filter and 0.2dB for the harmonic rejection filter.

“This development has demonstrated that we can overcome the manufacturing challenges of integrating filters along with multiple die into an SMT package,” says Filtronic Broadband’s managing director Mike Weaver. “This is not easy at mmWave frequencies, and will give us a crucial head start towards eventual production when the market demand for 5G components at 26GHz begins to ramp up.”

Tags: Plextek

Visit: www.plextekrfi.com

Share/Save/Bookmark
See Latest IssueRSS Feed

AXT

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player



CS Mantech