Temescal

Semigas

CLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIACLICK HERE: free registration for Semiconductor Today and Semiconductor Today ASIA

Join our LinkedIn group!

Follow ST on Twitter

IQE

19 March 2015

Emcore to demo end-to-end DOCSIS 3.1 CATV transmission link at OFC

In booth #608 at the Optical Fiber Conference (OFC 2015) in Los Angeles (24-26 March), Emcore Corp of Alhambra, CA, USA (which provides compound semiconductor-based optical components, subsystems and systems for the broadband and specialty fiber-optics market) is hosting a demonstration of its end-to-end DOCSIS 3.1 CATV transmission link capabilities.

A DOCSIS 3.1-compliant prototype of Emcore's Medallion 6000 Series 1550nm CATV Transmitter will be featured, along with the new Medallion 2100 Optical A/B Switch and Medallion 7100 CATV Fiber Amplifier transmitting over a 40km fiber link to Emcore's RFoG (radio frequency over glass) Transceiver.

Based on Emcore's proprietary continuous wave laser technology, the Medallion 6000 externally modulated transmitter couples high optical output power up to 11.0dBm with low optical linewidth, resulting in what is claimed to be unmatched performance. The transmitter leverages proprietary pre-distortion circuitry to provide superior CTB (composite triple beat) and CSO (composite second order) performance with SBS (stimulated Brillouin scattering) suppression levels of greater than 21dBm through 40km of fiber.

The Medallion 2100 Optical A/B Switch is a high-performance solution for network protection and optical redundancy in CATV/FTTx networks. Its automatic switching protects the network from inadvertent service outages due to up-stream optical signal degradation.

The Medallion 7100 Fiber Amplifier provides very stable optical outputs over a wide operating temperature range, as well as the exceptionally high power and low noise figures demanded by CATV applications.
Emcore's RFoG Transceiver is passive optical network (PON)-compatible and supports 1310/1590/1610nm burst mode analog return-path, and digital or QAM upstream.

"Our end-to-end DOCSIS 3.1 demonstration at the OFC will show Emcore's capabilities to deliver the highest-quality video and audio, along with high-speed data transmission in a DOCSIS 3.1-compatible system," says Gyo Shinozaki, director of marketing for CATV products. "Emcore's line of CATV components and systems will support cable operators as they move to this latest DOCSIS standard for higher-speed data transfer over their existing CATV networks," adds Shinozaki.

Also at OFC, Emcore is presenting its complete line of laser and optical receiver components for the transmission of video, voice and data signals over high-speed fiber optics, as well as components for wireless and distributed antenna system (DAS) applications.

See related items:

Emcore launches 7840 DOCSIS 3.1 low-noise CATV optical receiver and Medallion 2100 optical A/B switch

Tags: Emcore CATV

Visit: www.ofcconference.org

Visit: www.emcore.com

Share/Save/Bookmark
See Latest IssueRSS Feed

AXT